Fresh mushrooms need a fast and carefully managed cold chain. They continue to respire after harvest, contain substantial moisture and can lose firmness, colour and saleable weight when cooling is delayed. A well-planned mushroom cold storage facility therefore connects harvesting, grading, packaging, pre-cooling, chilled holding and dispatch as one continuous process.
Metalex Cryogenics can support this process with refrigeration engineering, compressors and coordinated industrial refrigeration plant equipment. Final design begins with the mushroom variety, incoming temperature, daily throughput and required holding time not a generic room tonnage.
Temperature and humidity for fresh button mushrooms
Fresh button mushrooms are commonly pre-cooled and stored within a low chilled range, often around 0 to 4°C. The exact room setpoint should follow the variety, packaging system, intended storage period, dispatch route and customer specification. An ICAR-published study evaluated white button mushrooms under refrigerated conditions of 4 ± 2°C, demonstrating why temperature-controlled packaging and storage should be considered together.
Humidity is equally important because mushrooms lose moisture readily. High, controlled relative humidity commonly around 90–95% for fresh button mushroom planning can help limit dehydration. However, humidity should not be created through uncontrolled wetting. Air distribution, coil temperature difference, door management and packaging must work together to support the product while limiting surface condensation.
Pre-cooling and storage are different duties
Pre-cooling removes field heat and respiration heat soon after harvest. Holding storage then maintains the product near its target condition. Trying to cool a large warm batch only with the holding room can extend pull-down time and disturb already cooled stock.
Project planning should define the harvest-to-cooling interval, crate or punnet format, kilograms loaded per hour and required pull-down time. Where daily arrivals are substantial, a dedicated pre-cooling room or separated loading cycle can give the refrigeration system a clearer duty.
“For mushrooms, the refrigeration plan begins with how quickly harvested product must reach its target condition not only the final room temperature.”Metalex Engineering Team
What determines the refrigeration load?
A reliable load calculation includes warm product entering the room, product respiration, wall and ceiling transmission, door infiltration, people, lights, fan motors and the required pull-down period. Daily tonnage alone is not enough. The same storage capacity can require very different equipment when one project receives product gradually and another loads a full warm batch within a few hours.
Room insulation, vapour sealing, door discipline and crate stacking also influence performance. Clear air passages should allow even circulation around the load without directing unnecessarily strong air onto exposed mushrooms. See the wider industrial cold storage planning guide for the relationship between room construction and refrigeration duty.
Coordinating Metalex refrigeration equipment
Depending on project capacity and system architecture, Metalex can review MX Series water-cooled, IS Series air-cooled and MXT/T Series reciprocating ammonia compressors. Final compressor selection is based on required kW or TR, evaporating temperature, condensing condition, operating hours and load variation.
The compressor should be coordinated with the MEC evaporative condenser, refrigeration pressure vessels, industrial refrigeration valves, air and water purgers and Metalex control panels. Coordinated controls can organise compressor staging, room-temperature monitoring, alarms and operating information according to the approved project scope.
Information required before requesting a quotation
For a useful preliminary discussion, share the mushroom variety, room dimensions, storage capacity, daily loading, incoming and target product temperature, pull-down time, packaging, expected holding period, door-opening pattern, project location, power supply and future expansion plan. This allows the Metalex engineering team to review the refrigeration duty and suitable equipment configuration.
Frequently asked questions
Quick answers for mushroom growers, aggregators, cold-store operators and project teams.
A low chilled range, often around 0–4°C, is commonly considered. Final conditions should follow variety, packaging, holding time and buyer requirements, with the duty reviewed by Metalex Cryogenics.
Controlled high humidity helps limit moisture loss. Correct airflow, packaging and refrigeration operation should also help manage condensation.
Prompt pre-cooling removes field and respiration heat before the product enters its holding cycle. The required arrangement depends on hourly loading and pull-down time.
Yes. Metalex cold-storage engineering can coordinate compressors, condensers, pressure vessels, valves, purgers and controls around the approved mushroom-storage duty.
Plan the cold chain around the product
A strong mushroom cold-storage project aligns rapid cooling, stable chilled holding, controlled humidity, practical airflow and dependable equipment. Share real loading and operating data with Metalex so the plant can be planned around product quality, daily workflow and long-term serviceability.
